JAC 5000 Gallon Water Spray Truck Highlights Configuration

In the driving of the flat top, the configuration is slightly higher, there is not a lot of models. There is a good model is Jac 5000 Gallon Water Spray Truck, let’s take a look!

JAC 5000 Gallon Water Spray Truck
JAC 5000 Gallon Water Spray Truck

This car uses Jianghuai Galfa K5x flat top half-cab, which uses four U-shaped silver decorative strips, both sides are the flow, which can reduce the wind resistance;

The cab is standard with original air conditioners, airbag seats, electric doors and windows, remote control keys, central locks, ABS, driving recorders, electric heating mirrors, multi-function steering wheel, reversing image reservation interface, the configuration is very complete Missing comfort is much more.

This car has a diesel engine of Tuxi Ca6DLD-29E6 Euro VI 290 horsepower 6.6L, which is a 300L aluminum tank, an aluminum urea can, stainless steel exhaust brake, and 11R20 steel wire, a chassis lightweight.

This car is 10.1 meters long, 2.55 meters wide, 3.45 meters high, with a total quality of 25 tons, and the quality of charge is 11.7 tons, and the rated mass is 13.17 tons;

The tank is used as a circular shape, which is made of 5mm high-quality Wugang carbon steel plate, automatic welding process, and can have a pot of 14.5 cubic meters;

The left and right protective is welded; the post-protective and frame welding connection, the protective material is the carbon steel of Q235B.

2 panels are made inside the can body, which can make the vehicle more stable.

There is a 140mm jar in the top of the tank, both sides are the safety handrails and platforms, and the tail of the tank has also made a safe ladder so that the staff is up and down;

The circular gun cartridge is made on the two sides of the tank, and two water-water pipes are given at the factory; there is a warning light installed on both sides of the tail, which is used to remind the driving safety.

JAC 5000 Gallon Water tanker Truck
JAC 5000 Gallon Water tanker Truck

A viewing position is produced on the right side of the ladder, and you can check the water level in the can.

A work platform is made in the tail of the whole vehicle. The platform is made of carbon steel punching plates. The handrail is made of hand-gripping steel pipe, and the anti-slip effect is very good.

The dedicated device is installed is a large flow centrifugal water pump, which can be self-suction. Installing the three-bay of the aluminum alloy in front of the front is used to flush the road surface, and the angle can be manually adjusted. It can be flushed about 30 meters.

The water-absorbent ball valve, the water spas in and four-bit three-way installed in the middle of the vehicle left side; installed on the post platform, can be sprinkled, can be adjusted: straight, heavy rain, medium rain, light rain, hair rain ;

Installed on both sides, the side sprayed, the side spray selection is a duck mouth; two high shots are made in the upper right side of the tail, and the installation is two lotus heads, which can waterly the high point on the right side of the vehicle. Tree.

There is also a highlight of this car, that is, all ball valves are selected by the large-pass ball valve so that the pressure of each spray function will be large.

Lightweight body, enhanced structure, can be large, the cab comfort is also high, is this Jac 5000 Gallon Water Spray Truck is your dish?

en English
X