Four operating modes of Chengli truck crane

September 16, 2020 No Comments

 The sight of the lower operation is blocked, what do you have to do when you are operating at high altitude, up and down is troublesome, the middle position operation, if you look to the left, you can’t see the right, is there a more suitable operation method? The emergence of remote control has solved these problems, so fish and bear’s paws can sometimes have both.       The operation of the truck mounted crane mainly includes four operation modes: down operation, middle position operation, high altitude operation, and remote control operation. It can be said that each has its own strengths and weaknesses.       One. The meaning of four operation modes of truck crane 1. Bottom operation (as shown in the picture above): In addition

Classification and purchase of road sweeper trucks

September 14, 2020 No Comments

According to the source of power, road sweeping vehicles are divided into electric road sweeping vehicles and fuel road sweeping vehicles. It is necessary to choose electric road sweeping vehicles or fuel road sweeping vehicles according to the environment in which they are used. Generally, in environments such as factory workshops, shopping malls, parks, etc., because the cleaning area is small and the operation space is narrow, it is more appropriate to choose an electric road sweeper. On the other hand, the ground in these areas is relatively clean and the cleaning intensity is not strong. Electric road sweeping vehicles can be fully qualified for this kind of cleaning work. The power output of electric road sweeping vehicles is much smaller than that of fuel

Analysis of the four major differences between washing sweeping truck and sweeper truck

September 11, 2020 No Comments

With the rapid development of social economy and the continuous advancement of urbanization, the people’s material life has been greatly improved. While the people enjoy the dividends brought about by development, environmental protection has become another important task besides economic development. In order to ensure the appearance of the city and the living environment of residents, garbage cleaning, collection, and transfer are basically mechanized. As garbage cleaning equipment, washing sweeping truck and sweeper trucks are now widely used in cities, factories, communities, scenic spots and other areas that require garbage cleaning. Many people don’t know the difference between washing sweeper truck and road sweeper. What is the difference between the two, this article will give you a detailed analysis. 1. The difference between structure and

What are the methods to solve the uneven spraying of asphalt distributor trucks?

September 10, 2020 No Comments

The uneven distribution of the asphalt distributor trucks is a problem we often encounter in the process of using the asphalt distributor. For this reason, our company specially publishes the cause and solution of this problem as follows, so as to facilitate car buyers to encounter Such problems can be solved in time to relieve everyone’s troubles in using the car.     The main reasons for uneven distribution of asphalt distributor truck:    1. Check whether the asphalt nozzle is loose or blocked;    2. The position of the asphalt nozzle is not uniform;    3. The vehicle speed is too fast or too slow;    4. The asphalt viscosity is too large;    5. The height of the spray pipe from the ground

How to improve the efficiency of the wrecker during the rescue

September 9, 2020 No Comments

ONE. Coordination of command and dispatch system The biggest characteristic of road traffic accidents and vehicle breakdowns is “suddenness”, which requires timely processing time. Therefore, the rapid response of the dispatching system of the command “central” is essential.  A rescue company or a regional emergency response system often has an information platform to collect relevant information from all aspects at any time. After obtaining the information about the incident, the command center must first consider the basic road conditions at the location of the accident, the size of the accident, the size of the faulty vehicle, the materials carried, and the severity of the damage, and then how many and how large tonnage wreckers should be arranged for rescue.  For example, when a small car accident

Market advantages of remote control truck mounted cranes

September 8, 2020 No Comments

Guide: It is difficult to hire a driver with a crane, and the labor cost is high. What should I do? The remote control truck mounted crane can help you solve the manpower problem. It can be operated by one person. It saves time and worry, and is safe. One. Introduction of remote control truck crane The principle of remote control truck mounted crane: based on the basic functions of truck mounted crane, a wireless remote control device is added, which can perform operations within a range of 200 meters and can be operated by a wireless controller, which can be completed by one person; Wireless remote control: The wireless remote control mainly controls the extension, rotation, luffing, and lifting of the wire rope of

Is aluminum alloy fuel tanker worth buying?

September 6, 2020 No Comments

As a special special purpose vehicle of dangerous goods, the safety of oil tanker has always been the focus of national regulatory agencies, dangerous goods transportation companies and tanker owners, so as the core component of the tanker, the tanker body The choice of material has always been a problem for dangerous goods transportation companies and tank truck owners. If the tank body made of carbon steel is used, because the weight of the carbon steel tank body is large, the load will be less and it is easy to be overloaded; if the aluminum alloy tank body is used, although the tank body is lighter, it is worried about the aluminum alloy tank body. Because there is no toughness, I worry that the life

Production process of refrigerated truck body

September 5, 2020 No Comments

Chengli company refrigerated truck is mainly composed of three parts: the chassis, the body, and the unit. At present, the commonly used materials for the interior and exterior of the cabin are mainly glass fiber reinforced plastic, stainless steel, and 8 cm polyurethane inside. In addition to the material, another very important factor is the production process. This is why the same configuration, the same body material, but the price is different, as a manufacturer of refrigerated trucks, let’s take a look at how the new process refrigerated trucks are made. 1. Cutting First determine the size of the whole vehicle and the size of the car body, then measure the chassis size, design the car body drawings, and then the technicians will start to

Lifting parameters of Palfinger 12 ton truck mounted crane

September 4, 2020 No Comments

  Palfinger 12 ton truck mounted crane is the most frequently used model in the market. It is a medium-sized truck-mounted crane. It can lift 12 tons when the boom is not extended, the full boom can reach 14.8 meters, and the lifting weight can reach 1.7 tons. It is matched with Sany brand cranes. When operating, the boom is an extended boom, which can extend farther, and can operate multiple lifting actions at the same time, with fast lifting speed and higher work efficiency.  Palfinger 12 ton truck mounted crane is equipped with four-section booms as standard. Crane model: SPS30000, adopts polygonal boom body. The whole boom weighs 4200kg. Compared with other cranes of the same tonnage, it is lightweight and light. The vehicle’s

How to choose a fresh milk truck suitable for your use?

August 31, 2020 No Comments

Fresh milk trucks are the best means of transportation for fresh milk, milk, edible oil, and liquid foods. However, there are many brands of chassis and sizes. How to choose the most suitable for your own use? First, confirm the tank volume. It is necessary to confirm the suitable tank volume according to the daily transportation volume. The specific gravity of fresh milk is 1.02 tons/cubic meter, and the specific gravity of milk is 0.82 tons/cubic meter. If your daily transportation volume is 10 tons of fresh milk, then your The tank body is preferably 9.8 cubic meters or more. Second, confirm the temperature environment. There is a big difference in temperature between the southern region and the northern region. It is necessary to choose