|Sany 3.2 ton truck mounted crane|
|Number of boom sections||Section||Three-section basic arm||Four basic arm|
|Maximum lifting mass||kg||3200||3200|
|The farthest lifting weight||kg||840||550|
|Maximum lifting moment||tm||8||8|
|Hydraulic system flow||L/min||35||35|
|Range of luffing angle||.||0-75||0-75|
|Basic arm length||m||3.4||3.5|
|Full arm length||m||8.0||10.4|
The Sany Palfinger 3 ton truck mounted crane is divided into three-section boom or four-section boom. The three-section boom has a working radius of 8 meters and a lifting height of 9.8 meters. The maximum lifting capacity is 840kg. The four-section boom has a working radius of 10.4 meters. The lifting height is 12.5 meters, the farthest can lift 550kg, 360 degree full rotation, standard front hydraulic outrigger.
Sany Palfinger 3-ton truck-mounted crane chassis:
Sany Palfinger 3-ton truck mounted crane can be equipped with special chassis for truck-mounted cranes such as Dongfeng Furica, Sinotruk Ace, etc. After assembly, the length of the vehicle will not exceed 6 meters, and the blue card can be used. You can drive with the C photo, and there is no restriction on urban driving.
Advantages of Sany Palfinger 3 ton crane:
1.The single action has high speed, adopts double-speed winch, large displacement hydraulic system, telescopic, fast rope arranging speed and high work efficiency;
2.Can be combined action operation, humanized operation design, two hands can be operated at the same time, stretching, luffing, rotating and other actions can be freely combined;
3.The hoist moves smoothly, with precise positioning, and can complete difficult and high-precision hoisting tasks;
4.Compared with other cranes, the dead weight of the crane is lighter, with a lightweight design, which saves fuel and vehicle cost when idling.
5.The working radius is better than other cranes in the industry, and the hoisting is far and high.