6X4 ISUZU fvz 16cbm to 18cbm Compactor garbage truck

6X4 ISUZU fvz 16cbm to 18cbm Compactor garbage truck Chassis configuration: FVZ cab, reversible layout, diesel engine, Fast 9-speed gearbox, 1100R20 tires, with directional power assist system, air brake, power assist system with clutch, Euro V ISUZU 300 horsepower engine.

6X4 ISUZU fvz 16cbm to 18cbm Compactor garbage truck Bodywork configuration: effective compression volume of 10 cubic to 12 cubic meters, with internal hydraulic push plate to compact garbage, side with tie rod elevator, top with cover plate, fast lifting speed, the tail door is opened by hydraulic cylinder, the tail door and There is a 3cm thick rubber sealing strip between the boxes, and a hydraulic locking hook under the tail door is used to tighten the water leakage, and the manual electronic control double controller.

Item			Unit	Parameter
Overall dimensions			mm	10150x2500x3450
	Fact cubage		L	18000l
	Curb Weight		Kg	Appro×9500
	Body internal dimensions		mm	/
	Wheel base			4650+1300
Max speed			Km/h	90
Engine		Model		6HK1
		Displacemenet/power		8700/280
		Type		SIX cylinder, in-line, turbocharged, intercooled
		Max torque/speed		/
Transmission				9-speed
Tire specification				10.00-20
Drive axle				18T+18T
Front axle				7T
Color				Specified by customer
Body Special function
1			Body material		Side 5mm, bottom 5mm
2			Sewage tank		200L
3			Filler capacity		1.2M3
4			Fill time		20-30s
5			Discharge time		40-50s
6			Hydraulic pressure		16MPa
7			Control		Electronically controlled with manual
8			Others		With turnover system
9			Accessory		2 garbage bin

6X4 ISUZU fvz 16cbm to 18cbm Compactor garbage truckWorking parameter:

---

Hydraulic pump	Long source large flow 32-80 pump, optional double pump and double valve	Body material	High strength T420 special steel plate
Hydraulic cylinder	Xiamen Yinhua, Yantai Future	Box thickness	Lightweight design with 4mm at the bottom and 5 sides
Multi-way valve	Jiangsu Zhongmei, Italy imports	Sewage tank	2 (1 on the side and 1 on the rear)
Conversion mode	Photoelectric switch (formerly pressure relay)	Sewage seal	Tail diversion groove + rubber hydraulic lock
Automatic control	Standard configuration, Siemens PLC electronic control	Lighting device	Tail night light
Electric control box	3 (1 in the cab and 2 in the rear)	safety devices	Tail lift with hydraulic lock
Optional configuration	Hanging plastic buckets (120L, 240L, 360L, 480L, 660L), hanging iron buckets, triangle buckets, fully sealed buckets, swing arm racks, electric hydraulic system